RESUME


Dr. Jeng-Nan Juang

Professor, School of Engineering
Mercer University
1400 Coleman Avenue
Macon GA 31207

Phone: (478) 301-2574
Fax: (478) 301-2732
E-mail: juang_jn@mercer.edu


EDUCATION

  • Ph.D., Electrical Engineering, Tennessee Technological University, Cookeville, Tennessee (1986)
  • M.S., Electrical Engineering, Tennessee Technological University, Cookeville, Tennessee (1978)
  • B.S., Electrical Engineering, National Taiwan Ocean University (1975)

ACADEMIC EXPERIENCE

  • Professor, Electrical Engineering Department, Mercer University (1987- Present)
  • Chair Professor, Electrical Engineering Department, Southern Taiwan University, Taiwan (Summer 2012)
  • Chair Professor, Electrical Engineering Department, Cheng Shiu University, Taiwan (Summer 2011)
  • Professor, Electronic Engineering Department, National Yunlin Science and Technology University, Taiwan (Summer 2006)
  • Chairman, Association of Chinese Schools in Southeastern United states. (2001-2005)
  • Professor, Electrical Engineering Department, and Chairman, China Institute Affairs Development, China Institute Technology and Commerce, Taipei, Taiwan (1997-1998)
  • Department Head, Director, and Associate Professor, Engineering Technolog
  • Department, Roane State Community College, Harriman, Tennessee (1980-1987)
  • President, Taiwanese Association in East Tennessee. (1980-1981)

NON-ACADEMIC EXPERIENCE

  • Research Project Advisor, Graduate Program MERC & Warner Robins US Air Force Base, “RAPCEval” (2001-present)
  • Prime Consultant, Yunlin County Government, Taiwan:  “Applying Optical Taster” (2006-2007)
  • Steering Committee, Macon City Mayor’s Diversity Committee (2000-2005)
  • President, middle Georgia Sino American Association. (1998-2000)
  • Georgia Representative, The Chinese-American Academic and Professional Association in Southeastern, United State, Atlanta Georgia, Consultant (1999-present)
  • Consultant, Mercer Engineering Research Center (Wright-Patterson Air Force Base) (1991-1993)
  • Research Fellow, NASA Langley Research Center (1989-1990)
  • National Society of Professional Engineers (NSPE), Advisor of Student Chapter for Mercer Engineering School (1995-2001)
  • Physics Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee.  Performed research on "The RF-Excited CW HCN Waveguide Gas Laser" (1984-1986)
  • Research Assistant to Dr. Ventrice, (1978-1983), Electrical Engineering Department, Tennessee Technological University, Cookeville, Tennessee. Design and Development of "The C02-N2-H2 Laser”

MEMBERSHIP IN PROFESSIONAL ORGANIZATIONS

  • The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
  • American Society for Engineering Education (ASEE)
  • North America Taiwanese Professor's Association (NATPA)
  • American Institute of Aeronautics and Astronautics, Inc. (AIAA)
  • National Society of Professional Engineers (NSPE)

HONORS AND PROFESSIONAL RECOGNITION

  • Senior Member, American Institute of Aeronautics and Astronautics, Inc. (AIAA), 1996
  • Research Fellow, ASEE and NASA summer faculty research program, 1990
  • Research Fellow, ASEE and NASA summer faculty research program, 1989
  • Excellence in Teaching, award, Roane State Community College, 1986

JOURNAL PUBLICATIONS (2009-Present):

  • “A Low Cost Solar Tracker Design for Renewable Energy” The Journal of Management and Engineering Integration, ISSN 1939-7984, Volume 6, Number 2, Page 15-21, Winter 2013/14.
  •  “Innovation and Entrepreneurship in Engineering Education at MUSE” Journal of the Chinese Institute of Engineering (JCIE) ISSN 0253-3839, Vol. 35 No. 1, January 2012.
  • “Use of LED Backlighting System for Aircraft Cockpit Displays” International Journal of Intelligent Technologies and Engineering Systems. ISSN 2159-9734, Volume 1, Number1, Page 55-60, October 2011.
  • “A comparative Study on HCN and CO2 Gas Laser” The Journal of Management and Engineering Integration. ISSN 1939-7984, Volume 3, Number1, Page 81-89, Summer 2010.
  • “Experimental Investigation on Radio Frequency Excited Compact Continues Wave Hydrogen Cyanide Gas Laser” The Journal of Management and Engineering Integration, ISSN 1939-7984, Volume 2, Number 2, Page 75-80, Winter 2009/10.
  •  “Reliability Analysis on Incandescent Light Bulbs: A Case Study” Journal of the Chinese Institute of Engineers (October, 2010 Online) “A comparative Study on HCN and CO2  Gas Laser” The Journal of Management and Engineering Integration. ISSN 1939-7984, Volume 3, Number1, Page 81-89, Summer 2010.
  • “Experimental Investigation on Radio Frequency Excited Compact Continues Wave Hydrogen Cyanide Gas Laser” The Journal of Management and Engineering Integration, ISSN 1939-7984, Volume 2, Number 2, Page 75-80, Winter 2009/10.
  •  “Reliability Analysis on Incandescent Light Bulbs: A Case Study”  Journal of the Chinese Institute of Engineers (October, 2010 Online)
  •  “Use of LED Backlighting System for Aircraft Cockpit Displays” Proc. International Conference on Manufacturing and Engineering Systems (ICMES 2010), December 16-18, 2010, Southern Taiwan University, Taiwan, pp. 17-22.
  • “Design of LED Backlighting System for Aircraft Cockpit Displays” Proc. IEMS 16th International Conference, March 8-10, 2010, Cocoa Beach, Florida.
  • “Statistical Analysis on C-5Aircraft Pod Panel Damage” Proc. IEMS 16th International Conference, March 8-10, 2010, Cocoa Beach, Florida.
  • Hot Cathode Fluorescent Lamps: A Case Study” The Journal of Management and Engineering Integration. ISSN 1939-7984, Volume 2, Number1, Page 77-82, Summer 2009.
  • “Experimental Investigation on Radio Frequency Excited Compact Continues Wave Hydrogen Cyanide Gas Laser” The Journal of Management and Engineering Integration, ISSN 1939-7984, Volume 2, Number 2, Page 75-80, Winter 2009/10.
  • “Experimental Investigation on RF-Excited Compact CW-HCN Laser Systems” International Journal of Innovative Computing, Information and Control, ISSN 1349-4198, Vol.6, No.5, Accepted and to be published in May 2010. 

PUBLISHED IN CONFERENCE PROCEEDINGS (2009-Present):

  • “Design of a Solar Tracking System for Renewable Energy” Presented and Published in the ASEE Zone 1 Conference /Sponsored by IEEE to be held in Bridgeport, CT, April 3-5, 2014.
  •  “Terminate Fiber Optic Connector Through The Hand Polishing Method” Proc. International Conference on Intelligent Technologies and Engineering Systems (ICITS 2013), December 12-14, 2013, Cheng Shiu University, Kaohsiung, Taiwan, pp. 205.
  • “Use of LED Backlighting System for Aircraft Cockpit Displays” Proc. International Conference on Manufacturing and Engineering Systems (ICMES 2010), December 16-18, 2010, Southern Taiwan University, Taiwan, pp. 17-22.
  • “Design of LED Backlighting System for Aircraft Cockpit Displays” Proc. IEMS 16th International Conference, March 8-10, 2010, Cocoa Beach, Florida.
  • “Statistical Analysis on C-5Aircraft Pod Panel Damage” Proc. IEMS 16th International Conference, March 8-10, 2010, Cocoa Beach, Florida.
  • “A Study on the Flow of Air and Water Vapor in the Fuel Cells” Presented and Published in the ASEE NE Section Conference to be held in Boston, May 7-8, 2010.
  • “A Study on the Flow of Air and Water Vapor in the Fuel Cells” Presented and Published in the ASEE NE Section Conference to be held in Boston, May 7-8, 2010.
  • “Low Cost Soil Moisture Monitoring System: A Capstone Design Project” Accepted for Presentation and Publication, IEMS 16th International Conference, March 8-11, 2010, Cocoa Beach, Florida.
  •  “Entrepreneurship in Engineering Education at MUSE” Proc. International Conference on Manufacturing and Engineering Systems (MES 2009), December 17-19, 2009, National Formosa University, Taiwan, pp. 28-33.
  • “Design of an Automatic Power Switch for Renewable Energy Sources” Proc. International Conference on Manufacturing and Engineering Systems (MES 2009), December 17-19, 2009, National Formosa University, Taiwan, pp. 23-27.
  • “Evaluation of Ring Laser and Fiber Optic Gyroscope Technology” Proc. American Society for Engineering Education, Middle Atlantic Section ASEE Mid-Atlantic Fall 2009 Conference, October 23-24, 2009. ITT-Technical Institute, King of Prussia, PA.
  • “Determining Significant Factors and Their Effects on Software Engineering Process Quality” Proc. American Society for Engineering Education, Middle Atlantic Section ASEE Mid-Atlantic Fall 2009 Conference, October 23-24, 2009. ITT-Technical Institute, King of Prussia, PA.
  • “A High Voltage DC Power Supply to Excite a Laser Tube: A Capstone Design Project” Proc. American Society for Engineering Education, Southeastern Section ASEE-SE Annual Conference, April 5-7, 2009. Southern Polytechnic State University, Marietta, GA.
  • “Effect of Temperature on Dry Cell Life Span: A Case Study” Proc. American Society for Engineering Education, Southeastern Section ASEE-SE Annual Conference, April 5-7, 2009. Southern Polytechnic State University, Marietta, GA.
  • “Improving Service Quality in a Health Care Facility: A Case Study” Proc. IEMS 15th International Conference, March 9-11, 2009, Cocoa Beach, Florida.
  • “Fault Detection in Phased Array Antenna System Using Computer Simulation” Proc. VI International Conference on Engineering and Computer Education/Sponsored by IEEE-ES, pp 101-104, March 8-11, 2009, Buenos Aires, Argentina.
  • “An Automatic Garage Door System: A Capstone Design Project” Proc. VI International Conference on Engineering and Computer Education/Sponsored by IEEE-ES, pp 96-100, March 8-11, 2009, Buenos Aires, Argentina.
  • ”Process Control Using Multivariate Analysis: Undergraduate Research Experience through Practical Cases” Proc. VI International Conference on Engineering and Computer Education/Sponsored by IEEE-ES, pp 237-241, March 8-11, 2009, Buenos Aires, Argentina.

 

LEADERSHIP IN INTERNATIONAL TEAMS, WORKSHOP AND CONFERENCE ORGANIZATION

  • General Chair & Editor-in-Chief, The International Conference on Intelligent Technologies and Engineering Systems, USA (2012-2014)
  • Editorial Board, The International Journal of Management & Engineering Integration, USA (2009-2014)
  • Editor-in-Chief, The International Journal of Intelligent Technologies and Engineering Systems, USA (2011-2012)
  • Editor-in-Chief, International Conference on Manufacturing and Engineering System, USA (2009-2011)
  • Board of Director, Georgia Partnership for Excellence in Education, Georgia, USA (2003-present)
  • International Judge, International Judge of Asian Young Inventions of Energy Exhibition, Taiwan,  (2010)
  • Session Chair,  International Conference on Manufacturing and Engineering Systems, Taiwan (ICMES 2009-2010)
  • Session Chair, International Conference on Industry Engineering & Management Systems, USA (IEMS 2009-2010)
  • Session Chair, The Fourth IEEE International Symposium on Service-Oriented System Engineering (SOSE 2008)
  • General Chair, International Conference on Manufacturing and Engineering System (ICMES 2010), Southern Taiwan University (2010)
  • General Chair, International Conference on Manufacturing and Engineering System (ICMES 2009), National Formosa University (2009)
  • Local Arrangement Chair, IEEE 2007, Thirty-Ninth SSST, Macon, Georgia, USA (2007)
  • Steering Committee Member, Macon Mayor’s Diversity Committee, Georgia, USA (2001-2006)
  • Professor (an Honorary Basis), Information Technology, Schiller International University, Germany, Spain, Switzerland, England, France, USA (2004)
  • General Chair, International Workshop on Future Aerospace Maintenance & Technology, China Institute, Taiwan (1998)
  • Prime Consultant, Wright Patterson US Air Force Base, Dalton, Ohio (1991-1994)
  • Research Fellow, NASA Langley Research Center, Virginia (1989-1990)